Tundish Monolithic Refractories
AksiTech has its own technology for Tundish monolithic lining products and applications.
Wear Lining: Tundish Spray Coating
Tech-Spray series, sprayable coating material is a high performing tundish wear lining. Quick and clean deskulling property is the key success function of TechSpray products. It is designed to adhere to steel skull which allows the removal safe and simple procedure.
Due to lower labor costs, easy and efficient installation, the sprayable tundish coating has gained worldwide acceptance in many billet, bloom and slab casting facilities. It can be sprayed on any refractory surface up to 80°C, which enables the steelmaker to utilize residual heat in the tundish helping to cure the lining. With zero rebound it is sprayable to any tundish regardless of geometry. The material consumption can be optimized by customer himself by placing less material in low erosion zones.
Product Range: Tech-Spray 60/65/70/75/80/85/90
Wear Lining: Tundish Dry Vibratable
Tech-Vibe series, moldable water-free coating material is a high performing tundish wear lining. It is applied by filling between the permanent layer of tundish and the steel former. The former is removed by crane after setting of material in 90 minutes. The material is originally designed to work as heat-set before removal. Based on customer requirements, material with cold-set property could be also offered. The original material could be used in both cold and hot tundish preheating practices. Tech-Vibe series products are suitable for long tundish sequences over 24 hours. Quick and clean deskulling property is the key success function of Tech-Vibe products. It is designed to adhere to steel skull which allows the removal safe and simple procedure.
Product Range: Tech-Vibe 75/80/85
Tundish Ramming and Sealing Mixes
Tech-Ram and Tech-Seal series, ramming and sealing mortar products are designed to work in the tundishes for multi-purpose applications. Based on customer requirements, either Silica, Magnesia or Alumina based products are recommended.
Product Range: Tech-Ram S/M/A and Tech-Seal S/M/A
Safety Lining: Tundish Castable Masses
Tech-Cast series, monolithic castable material is a high performing tundish safety lining. The material is applied as casting of the premixed wet material between the tundish insulation layer and the tundish mold. The material is air-setting and the tundish goes under drying regime after the removal of the mold. It is designed to resist against the diffusion of the steel skull which allows the removal safe and simple procedure of the wear lining.
Product Range: Tech-Cast 80/85
Please contact to our specialists for investigating suitable qualities for your applications.